Pond Answers

What Size Liner for a 10 x 8 ft Pond (2 ft Deep)?

A 10 x 8 ft pond at 2 ft deep needs about a 16 x 14 ft EPDM liner (224 sq ft) and matching underlayment. It holds roughly 1,197 gallons.

Please read: This content is researched for general information only and is not professional, medical, or veterinary advice. Every situation is different, so use your own judgment and double-check before acting, especially when adding chemicals or feeding and treating animals. Consult a qualified professional when in doubt. This page also contains affiliate links; we may earn a small commission at no extra cost to you.

Quick answer

16 x 14 ft EPDM liner size

A 10 x 8 ft pond dug to 2 ft deep needs about a 16 x 14 ft liner, which is 224 square feet. Order matching underlayment the same size, and choose fish-safe EPDM. This pond holds roughly 1,197 gallons.

Liner and volume for a 10 x 8 x 2 ft pond

Measurement Value
EPDM liner size 16 x 14 ft
Liner area 224 sq ft
Underlayment (same size) 16 x 14 ft
Approx. volume 1,197 gal

A liner has to run down one wall, across the bottom, up the far wall, and leave material to anchor the edge, so it is always larger than the pond surface. For a 10 x 8 ft pond at 2 ft deep, that works out to about a 16 x 14 ft sheet, or 224 square feet.

How the Liner Size Is Calculated

The formula adds twice the depth to each dimension, because the liner drops down both walls, plus about a foot of overlap on each edge to anchor it. For this pond that is 10 + (2 x 2) + 2 = 16 ft long and 8 + (2 x 2) + 2 = 14 ft wide, a total of 224 square feet. Liner comes in fixed widths, so round up to the next stocked sheet rather than cutting it close. Always use the maximum depth, not the average, since the liner must physically reach the deepest point.

EPDM, Underlayment, and What It Holds

Fish-safe EPDM rubber is the durable standard: a flexible 45 mil membrane that molds to curves and shelves and lasts decades, and the fish-safe grade is non-toxic to koi. Always lay underlayment beneath it, ordered to the same 16 x 14 ft size, to cushion the liner from stones and roots. At 10 x 8 ft and 2 ft deep this pond holds roughly 1,197 gallons, which suits about 4 koi. For serious koi keeping, aim for at least 1,000 gallons and a 3-foot deep zone.

Liner gear for a 10 x 8 ft pond

🟦

EPDM pond liner (~16 x 14 ft)

Fish-safe 45 mil rubber, the durable standard.

Check Price on Amazon
🧵

Pond underlayment fabric

Order the same 16 x 14 ft size.

Check Price on Amazon
🩹

Pond liner seam tape

For joins and patch repairs.

Check Price on Amazon

Pond Build & Maintenance Planner

Build planner, stocking planner, water-test log, and seasonal maintenance schedule, in one printable planner that keeps your pond healthy year-round.

Frequently Asked Questions

What size liner for a 10 x 8 ft pond 2 ft deep?

About a 16 x 14 ft liner, or 224 square feet. That is the pond length and width plus twice the depth on each, plus roughly a foot of overlap per edge to anchor it. Round up to the next stocked sheet.

How many gallons is a 10 x 8 x 2 ft pond?

Roughly 1,197 gallons, using length times width times depth times 7.48 gallons per cubic foot. Sloped sides and shelves reduce the real number a little, so treat this as a rectangular maximum.

Do I need underlayment for a 10 x 8 ft pond?

Yes, always. Order underlayment in the same 16 x 14 ft size as the liner. The geotextile fabric cushions the liner from sharp stones, roots, and settling soil that would otherwise puncture it over the years.

Is a 10 x 8 ft pond big enough for koi?

At about 1,197 gallons and 2 feet deep it is on the small side for koi, which want at least 1,000 gallons and 3 feet of depth. Goldfish are a better fit, or dig deeper and larger.

Planning or running a pond?

Use our free calculators and guides to get every number right.

Pond Planner: $39